Hot Water Insulation
Frost King Water Heater Insulation Blankets (2" thick x 48" x 75" R6.7) FKSP57-67
Vinyl Backing Fiberglass Insulation Blankets are designed for gas, oil or electric water heaters up to 60 gallon size. Package contains a roll of plastic tape. Blanket is 2" thick x 48" x 75" R6.7.
2" Thick x 48" x 75" R6.7
Frost King Water Heater Insulation Blankets (1 1/2" thick x 48" x 75" R5) FKSP57-5
Vinyl Backing Fiberglass Insulation Blankets are designed for gas, oil or electric water heaters up to 60 gallon size. Package contains a roll of plastic tape. Blanket is 1 1/2" thick x 48" x 75" R5.
1-1/2" Thick x 48" x 75" R5
Frost King Water Heater Insulation Blankets (3" thick x 48" x 75" R10) FKSP57-11C
Vinyl Backing Fiberglass Insulation Blankets are designed for gas, oil or electric water heaters up to 60 gallon size. Package contains a roll of plastic tape. Blanket is 3" thick x 48" x 75 R10.
3" Thick x 48" x 75" R10
Frost King Fiberglass Pipe Wrap Kits FKSP41X
Simple effective way to insulate pipes of all diameters. They are also ideal for overwrapping electronic heat cables used to prevent water pipe freezing. The kits consist of a roll of 1/2" thick fiberglass plus a length of plastic vapor barrier overwrap.
3" x 1/2" x 25 ft
Frost King Foam and Foil Pipe Insulation FKFV15H
A simple, one-step way to insulate both hot and cold pipes. On hot pipes, it helps stop wastful heat loss. It also dampens sound and vibrations
2" x 1/8" x 15 ft
Frost King Pre-Slit, tubular Polyethylene Foam Pipe Insulation FKP13XB-6
These tubes are made of closed cell polyethylene foam. They are pre-slit so they slip onto pipes quickly and easily.
For 1-1/4" copper or 1" iron pipes; four 6 foot pieces.
Frost King Pre-Slit, tubular Polyethylene Foam Pipe Insulation FKP10XB-6
These tubes are made of closed cell polyethylene foam. They are pre-slit so they slip onto pipes quickly and easily.
For 1/2" copper or 1/4" iron pipes; four 6 foot pieces.
Frost King Pre-Slit, tubular Polyethylene Foam Pipe Insulation FKP11XB-6
These tubes are made of closed cell polyethylene foam. They are pre-slit so they slip onto pipes quickly and easily.
For 3/4" copper or 1/2" iron pipes; four 6 foot pieces.
Frost King Pre-Slit, tubular Polyethylene Foam Pipe Insulation FKP12XB-6
These tubes are made of closed cell polyethylene foam. They are pre-slit so they slip onto pipes quickly and easily.
For 1" copper or 3/4" iron pipes; four 6 foot pieces.
- 1
- 2
- Next Page »
